Homemade wood heaters – You only need to add a few parts to consider the idea finish: Legs, a reading box with a hinged lid, a vent and a smoke stack. You can construct all these pieces of steel that you want to take a few things into consideration. The legs should be strong and level and should lift the tank about a foot off the ground. The most important aspect of the heater is temperature control functionality, which means that the box as airtight as possible.
Ideas for homemade wood heaters, loading box will be attached to the top front part of the tank and be designed so that it opens at hinges and closes flat and securely over a lip raised about 5 inches from the hole in the tank. This will minimize the amount of heat lost during loading and allows you to regulate the temperature more effectively. The opening of the box should be large enough to make it easy to load with dimensions of about 17 inches by 12 inches.
The smoke stack should be about 6 inches in diameter and should extend at least 1 cm below the bottom of reading the box into the tank. If the homemade wood heaters will be installed in your home, be sure to carefully construct your smoke stack so that there is proper ventilation without the risk of fire. At the bottom front of your stove, install a 2-inch diameter pipe to allow the flow of air into the bottom of the tank. When the oven is fully assembled, paint it with the high temperature engine paints.